Cleaver Brooks Economizers Includes:
C1X
Has individual fin tubes compression-fitted to the liquid manifold for ease of tube replacement requiring no welding. It increases the amount of heat recovered by capturing both sensible and latent heat. The internal gas bypass can be used to maintain water temperature when too much heat is available.
Features:
- Single-circuit heat transfer cold makeup, ice-cold process water preheater (Less than ~120°F)
- Tube core assemblies are individually removable and made from 316 stainless steel tube with aluminum fins (Al-Fuse)
- 316 stainless steel exhaust gas bypass, interior shell, condensate drain, and transition connections
- Hinged access door for complete internal inspection
- TP 316L pressure vessel side tube heat transfer section
- Condenses on natural gas only
C2X
The lower section of the economizer recovers energy by preheating the boiler feedwater. The upper section preheats virtually any cool liquid stream (makeup water, wash water, hot water preheating, etc.), and the control system maximizes condensing when firing natural gas, then automatically switches to a near-condensing mode when firing #2 oil (if applicable).
Features:
- Separate upper and lower coils – allows heating of two completely separate liquid streams without cross-contamination
- Tube core assemblies are individually removable and made from 316 stainless steel tube with aluminum fins (Al-Fuse)
- 316 stainless steel exhaust gas bypass, interior shell, condensate drain, and transition connections
- Hinged, stainless steel access doors
- All gas side surfaces are 316 stainless steel to eliminate corrosion
- Condenses on natural gas only
CCE
Flexibility allows specific engineering requirements to be met, such as fin spacing for fouling conditions and low gas pressure drops. The internal gas bypass can be used to temper the exiting gas for stack corrosion control or to maintain water temperature when too much heat is available.
Features:
- Cylindrical model
- Compact and lightweight
- High performance BTU recovery
- Hinged, stainless steel access doors
- Stainless steel, internal exhaust gas bypass
CRE
Has individual fin tubes compression-fitted to the liquid manifold for ease of tube replacement requiring no welding.
Features:
- Rectangular model
- Individually removable, finned tubes
- No pressure vessel welds within the shell
- Hinged, stainless steel access doors
- Stainless steel, internal exhaust gas bypass
