Products

The magnetostrictive design allows for precise measurement of water level. Advanced technology alerts the operator if the level float is slowing down in relation to normal movement and prompts the operator to perform a water column blowdown. The system also detects if the float has not moved and shuts the boiler’s burner off while time- […]

The PCS140e.1 is a simple pump control system with lead/lag sequencing on a timed rotation, “first on first off” basis, or manual rotation (user-selectable). Pumps are turned on or off as required to maintain a pressure set point within a user-configurable deadband. The PCS140e.1 can control from 2 to 4 pumps for on-off control (no […]

The LCS250e.1 is a level-control system which uses 1 or 2 modulating valves to maintain water level in a two-tank system. Level control is provided for the DA tank while the surge tank receives feed control, with a bias to limit the valve position according to surge tank level. The system accepts a 4-20 ma […]

The LCS150e.1 is a level-control system which uses 1 or 2 modulating valves to maintain water level in a single tank. The system accepts a 4-20 ma input for use as a level signal. Alarms denote High-High-, Low-, Low-Low-, and Low-water cut-off levels. Data is available via Modbus RTU communications or logged to an optional […]

The ADAC is a PLC-based DA/surge tank control system that can monitor all points on a DA or surge tank and control the pumps via on/off or variable speed drives. The ADAC also has the functions and features to control multiple input valves, condensate return, fresh water make-up, emergency make-up, etc. It can communicate data […]

The system connects to up to 8 Hawk equipped boilers, master panel and ADAC systems on the same Ethernet network and pulls data in from each. Replicates the boiler overview display, Burner Management display, trends, boiler user analog inputs and run data. Allows user to write to a Master Panel to set lead lag sequence, […]

The core design allows for control of multiple hot water boilers in any combination of size and type, and extends to control and optimize the use of condensing, non-condensing, and hybrid boiler systems. This allows management of a heating load as the control calculates independent PID loop for the condensing and non-condensing boilers, respectively. The […]

The Cleaver-Brooks IWT Plant Master is the central interface between each boiler’s control system and other boiler room equipment to external remote monitoring or building automation systems. The IWT Plant Master controls the unison modulation of IWT steam boilers. The system includes auto-rotation control to maintain equal amount of run hours on each boiler in […]

The Master Panel is the right plant-load control for any application. It features an open-control platform that works with any boiler system and can be tailored to meet your needs. Features: Lead-lag control of multiple boilers Auto rotation schedules Run time monitoring Isolation and primary pump control for hot water, firetube applications Built-in intelligence for […]

Max-Flow Thermal Fluid Heater (TFH) and High Temperature Hot Water (HTHW) generators are available for most applications ranging from 20-200 MMBTU/hr. They incorporate a fluid-cooled membrane wall construction for the furnace and heating coil enclosure, creating a highly efficient, shop-assembled package. They can be fitted with a register burner or designed to recover heat from […]

The Cleaver-Brooks Max-Fire boiler incorporates an integral furnace in a single shop-assembled package heat recovery steam generator (HRSG) that combines a furnace and evaporator and superheater, if applicable, with a natural circulation design. Capable of steam flows up to 500,000 lb/hr, the Max-Fire Series is offered in two different models. The MF (O-style) and MFA […]

Leveraging our extensive experience and expertise in heat and mass transfer to supply custom waste heat recovery units for turbine exhaust, process furnaces and other heat sources for water, glycol mixtures and thermal oil fluid heaters. Waste Heat Recovery Units (WHRUs) are available in vertical, horizontal or combination gas flow arrangements to conform to any […]

The D-style elevated drum is a 100% membrane water-cooled furnace, reducing costly, time-consuming, annual maintenance. The front and rear walls are welded and refractory-free, as well as the burner throat, when integrated with our NATCOM burner. D-style boilers can be customized to provide superheated steam. We offer both single- and dual-stage integral superheater systems with […]

Cleaver-Brooks is your single source for firetube boiler systems from the integrated boiler, burner and control to perfectly matched skid-mounted or containerized system.

Designed for steam applications up to 500 psig, hydronic comfort heating to 180(degrees)F or process water temperature to 410°F, this watertube boiler delivers big in a compact design, yet does not consume extra real estate in which to reside.

Cleaver-Brooks pre-packaged, skid-mounted steam boiler solutions offer a simple way to get up and running in less time, with less effort, than you might imagine. All of our pre-engineered systems include: Boiler, Feed System, Blowdown Separator and optional Water Softener and Chemical Feed. Custom-engineered systems are also available.

Cleaver-Brooks pre-packaged, skid-mounted steam boiler solutions offer a simple way to get up and running in less time, with less effort, than you might imagine. All of our pre-engineered systems include: Boiler, Feed System, Blowdown Separator and optional Water Softener and Chemical Feed. Custom-engineered systems are also available.

The PanaFlow ultrasonic flow meter systems are high-performance, affordable solutions for a variety of gas and liquid flow applications. It consists of multiple models; Z1G & Z2G The PanaFlow gas meter system is a complete ultrasonic flow meter offering for gas applications with a unique combination of accuracy, rangeability, and reliability in a robust meter design. The PanaFlow gas […]

ABB Remote Modular Controller-100 The ABB RMC-100 RTU is Capable of managing automation, liquids and gas measurement, and asset data concentration for well-pads, batteries, production and transmission facilities. The controller may still scale down to a single-board RTU footprint for smaller systems. There is no other platform in the industry with such a wide dynamic […]

The McCrometer V-Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam or gas media in rugged conditions where accuracy, low maintenance and cost are important. With its DP built-in flow conditioning design, the V-Cone Flow Meter is especially useful in tight-fit and retrofit installations in which the […]